Services
BENCH CHARGE MINIMUM: $35
SHOP LABOR RATE: $100/hour
INTONATION: PRICELESS!
It is our experience that 95% of guitars would benefit from a full set-up. It is impossible to tell whether an instrument is capable of playing in tune without a full evaluation on the bench, therefore we do not just “intonate” an instrument. See Setup.
SETUP
- STANDARD SETUP INCLUDES: tighten and lube tuners, check nut height, clean fretboard, remove tarnish from frets, adjust truss rod, adjust neck angle (if possible), set bridge/saddle height and radius, clean electronics, restring, tune, intonate, test, and polish.
- Acoustic 6-string and all 6-string electric guitars WITHOUT locking tremolo systems: $100 plus strings
- Locking tremolo guitars (incl. Parker guitars), setup also includes leveling tremolo, tuning, and intonation: $130 plus strings
-
Exceptionally grimy or filthy instruments will incur a $70 surcharge for the labor involved in unsticking gunked up parts, removing scum, polishing, etc.
TRUSS ROD ADJUSTMENT:
- At peghead: $35
- Acoustics: $35
- If neck must be removed to access truss rod: $60
- Double truss rod adjustments (e.g., Rickenbacker): $65
INSTALL TUNERS:
- $60 - Does NOT include doweling preexisting holes or reaming.
- $85 - For locking tuners, pin-located tuners, or tuners requiring additional peghead reaming (e.g., some Fenders and Gotohs).
NEW NUT:
- Precut graphite or tusq: $100 (includes nut blank)
- Handcut bone nut: $130 (includes nut blank)
- Brass or other materials: $140 (labor only)
- 12-string nut, custom nut: $155 and up (includes nut blank)
FRETWORK:
- Level, crown, and polish: $260
- Crown and polish only: $225
- Partial refret: $175 plus $20 per fret replaced
- Complete Refrets: $450+ depending on instrument, fingerboard type, and amount of binding
ELECTRONICS:
- Customization, coil tapping, phase switching, multi-option switches, etc. will be billed at the standard hourly rate ($100/hour).
PICKUP INSTALL - ELECTRIC:
- Any woodworking or customizing necessary will be billed at the standard hourly rate.
- Single humbucker: $75
- Dual humbucker: $100
- ES or hollow-series guitars: $165 to $200
- Stratocaster: $75 for one, $80 for two, $100 for three
- Telecaster: $100 for bridge pickup/re-intonation; $125 for both pickups
- Pickup potting: $150
- Pickup rewinding: $150 and up (sent out*)
PICKUP INSTALL - ACOUSTIC:
- Any woodworking or customizing necessary will be billed at the standard hourly rate.
- Sound hole pickups (hardwired to jack): $100
- Piezo, with battery attachment: $125
- Replace input jack on pickguard or plate: $55 plus jack
- Barrel jacks in instruments with active electronics will be billed at hourly rate.
ACOUSTICS:
- New saddle: $100 (parts included)
- Compensated bone saddle: $145 (parts included)
- Crack repairs: approx. $55 per inch
- Bridge re-glue: $200 and up
- Replace bridge: $250 to $300 (additional charge for 12-strings)
- Install strap button: $30 (includes chrome button)
RESTRING:
- $3.50 per string (does not include strings)
- Classical guitars: $4.50 per string
- This price does NOT include 12-string, slotted-peghead, and Rickenbacker 12-string guitars. Please ask about restringing prices for these instruments.
PLEASE NOTE:
- All prices are estimates only and DO NOT include parts, strings, etc., unless indicated.
- Due to the limited space in our store, any repaired instrument or amp not picked up within 30 days of notification will be charged a storage fee of $3 per day for an additional 15 days, after which the instrument will be sold for salvage.
- We reserve the right to refuse instruments for repair if we feel that we cannot execute the repair satisfactorily.
- We are not responsible for damage to the instrument finish (chips, dings, etc.) for instruments left without a protective bag or case.